Traditionally electric brake controllers had to be hard-wired into your tow vehicle. This meant every time you wanted to change cars, let a friend borrow caravan or hire out your caravan, the tow vehicle had to have a brake controller fitted as well.
Designed for Australian Conditions, the Elecbrakes Bluetooth electric brake controller is waterproof, dustproof and housed inside a fully sealed vibration-resistant housing, making it a full go anywhere solution for all types of caravans, RVs and trailers.
The Elecbrake plug and play version allows a fully featured proportional electric brake controller to be installed on your trailer and ready to go within 10 minutes.
Using the plug and play version of the Elecbrake is a fuss free option saving you time and money of a full install, without compromising on functionality or capabilities.
Providing precise proportional brake control, with multiple user defined braking programs and settings for forward, reverse and minimum brake responses. Allowing the user to dial in brake response perfectly synchronise with the tow vehicle. All without hard wiring to the trailers electrical loom!!
- Proportional Braking
- Multiple braking programs
- Device stored settings
- Urethane Resin encased Electronics
- Water proof
- Shock proof
- Fuss Free installation
- Multiple adapters available
- Non directional mounting
Elecbrakes employs a high-speed microprocessor and various sensors which continuously sample the operating parameters over 1,000 times per second.
For communication, the device uses the widely adopted Bluetooth 4.0 standard, and the hardware selections yield a Bluetooth device that has long range capability ensuring high connection reliability and no dropouts under typical operating conditions. This ensures that the device can be mounted anywhere on the trailer’s draw bar.
The adapters connect to the brake controller via a IP68 rated connector. Allows compliance with ADR38/05.
Plug and Play Adapters allow the Elecbrakes device to be easily installed onto the trailer. No wiring is required. The range of available Adapters suits most combinations of trailer plugs and sockets.
Car Plug Options in this bundle:
- 12 Pin Flat
Trailer Socket Options in this bundle:
- 12 pin Flat
Contact us after ordering and tell us what Car Plug and Trailer Socket you require.
Elecbrakes in-car remote control. Allows user to control brake response, select user defined programs and activate trailer brakes only by the manual override button. Allows compliance with ADR38/04.
The EBR will connect to any Elecbrake controller.
The EBR kit comes with:
- EBR remote
- 12/24v USB charger
- USB cable