VICTRON – PHOENIX INVERTERS
Inverters convert stored direct current(DC) power in your batteries into alternating power (AC) power, like the kind you get in your home, so you can run your electrical appliances wherever you are. There are two types of inverters pure sine wave and modified sine wave. Modified sine wave inverters are a more basic form of technology than pure sine wave inverters, they produce power which is perfectly adequate for powering simple electronics. Use modified sine wave inverters to provide power for your less sensitive appliances like phone chargers, heaters and air conditioners. Modified inverters are best suited for resistive loads which don’t have a start up surge.
Pure sine wave inverters use more sophisticated technology to protect even the most sensitive electronics. Pure sine wave inverters produce power which equals – or is better than – the power in your home. Appliances which may not function properly, or which may be permanently damaged, without pure, smooth power will be safe with pure sine inverters. Use these inverters for televisions, laptops, digital microwaves, fridges and other sensitive electronic equipment. Pure Sine inverters can power just about any AC appliance without risk of damage.
VE.Direct communication port:
The VE.Direct port can be connected to:
– A computer (VE.Direct to USB interface cable needed)
– Apple and Android smartphones, tablets, MacBook’s and other devices (VE.Direct Bluetooth Smart dongle needed)
Fully configurable:
– Low battery voltage alarm trip and reset levels
– Low battery voltage cut-off and restart levels
– Dynamic cut-off: load dependent cut-off level
– Output voltage 210 – 245V
– Frequency 50 Hz or 60 Hz
– ECO mode on/off and ECO mode sense level
Monitoring:
– In- and output voltage, % load and alarms
Proven reliability:
The full bridge plus toroidal transformer topology has proven its reliability over many years. The inverters are short circuit proof and protected against overheating, whether due to overload or high ambient temperature.
High start-up power:
Needed to start loads such as power converters for LED lamps, halogen lamps or electric tools.
ECO mode:
When in ECO mode, the inverter will switch to standby when the load decreases below a preset value (min load: 15W). Once in standby the inverter will switch on for a short period (adjustable, default: every 2,5 seconds). If the load exceeds a preset level, the inverter will remain on.
Remote on/off:
A remote on/off switch can be connected to a two pole connector, or between battery plus and the left hand contact of the two pole connector.
LED diagnosis:
Please see manual for a description.
375W
Cont. power at 25°C 375VA
Cont. power at 25°C / 40°C 300/260W
Peak power 700W
Output AC voltage / frequency (adjustable) 230VAC or 120VAC +/- 3% 50Hz or 60Hz +/- 0,1%
Input voltage range 9,2 – 17 / 18,4 – 34,0 / 36,8 – 62,0V
DC low shut down (adjustable) 9,3 / 18,6 / 37,2V
DC low restart and alarm (adjustable) 10,9 / 21,8 / 43,6V
Battery charged detect (adjustable) 14,0 / 28,0 / 56,0V
Max. efficiency 89/89/90%
Zero-load power 5,6/6,1/8,5W
Default zero-load power in ECO mode 1
ECO mode stop and start power setting Adjustable
Protection a – f
Operating temperature range -40 to +65°C (fan assisted cooling)Derate 1,25% per °C above40°C
Humidity (non-condensing) max 95%
Material & Colour Steel chassis and plastic cover (blue Ral 5012)
Battery-connection Screw terminals
Maximum cable cross-section 10 mm2 / AWG8
Standard AC outlets 230V: Schuko (CEE 7/4), IEC-320 (male plug included)120V: Nema 5-15R
Protection category IP 21
Weight 3,0kg/6,6lbs
Dimensions (H x W x D) 86 x 165 x 260mm
Remote on-off Yes
Automatic transfer switch Filax
Safety EN-IEC 60335-1 / EN-IEC 62109-1
EMC EN 55014-1 / EN 55014-2 / IEC 61000-6-1 / IEC 61000-6-2 / IEC 61000-6-3
Automotive Directive ECE R10-4
500W
Cont. power at 25°C 500VA
Cont. power at 25°C / 40°C 400/350W
Peak power 900W
Output AC voltage / frequency (adjustable) 230VAC or 120VAC +/- 3% 50Hz or 60Hz +/- 0,1%
Input voltage range 9,2 – 17 / 18,4 – 34,0 / 36,8 – 62,0V
DC low shut down (adjustable) 9,3 / 18,6 / 37,2V
DC low restart and alarm (adjustable) 10,9 / 21,8 / 43,6V
Battery charged detect (adjustable) 14,0 / 28,0 / 56,0V
Max. efficiency 90%
Zero-load power 6W
Default zero-load power in ECO mode 1
ECO mode stop and start power setting Adjustable
Protection a – f
Operating temperature range -40 to +65°C (fan assisted cooling)Derate 1,25% per °C above40°C
Humidity (non-condensing) max 95%
Material & Colour Steel chassis and plastic cover (blue Ral 5012)
Battery-connection Screw terminals
Maximum cable cross-section 10 mm2 / AWG8
Standard AC outlets 230V: Schuko (CEE 7/4), IEC-320 (male plug included)120V: Nema 5-15R
Protection category IP 21
Weight 3.9kg
Dimensions (H x W x D) 86 x 172 x 275mm
Remote on-off Yes
Automatic transfer switch Filax
Safety EN-IEC 60335-1 / EN-IEC 62109-1
EMC EN 55014-1 / EN 55014-2 / IEC 61000-6-1 / IEC 61000-6-2 / IEC 61000-6-3
Automotive Directive ECE R10-4
1200W
|
12 Volt Phoenix Inverter
|
12/1200
|
|
Cont. power at 25°C
|
1200VA
|
|
Cont. power at 25°C / 40°C
|
1000/850W
|
|
Peak power
|
2200W
|
|
Output AC voltage / frequency (adjustable)
|
230VAC or 120VAC +/- 3% 50Hz or 60Hz +/- 0,1%
|
|
Input voltage range
|
9,2 – 17 / 18,4 – 34,0 / 36,8 – 62,0V
|
|
DC low shut down (adjustable)
|
9,3 / 18,6 / 37,2V
|
|
DC low restart and alarm (adjustable)
|
10,9 / 21,8 / 43,6V
|
|
Battery charged detect (adjustable)
|
14,0 / 28,0 / 56,0V
|
|
Max. efficiency
|
91/91/92%
|
|
Zero-load power
|
7/8/10W
|
|
Default zero-load power in ECO mode
(default retry interval: 2,5 s, adjustable)
|
1/1.5/3.0
|
|
ECO mode stop and start power setting
|
Adjustable
|
|
Protection
|
a – f
|
|
Operating temperature range
|
-40 to +65°C (fan assisted cooling)Derate 1,25% per °C above40°C
|
|
Humidity (non-condensing)
|
max 95%
|
|
ENCLOSURE
|
|
|
Material & Colour
|
Steel chassis and plastic cover (blue Ral 5012)
|
|
Battery-connection
|
Screw terminals
|
|
Maximum cable cross-section
|
35/25/25mm2 / AWG 2/4/4
|
|
Standard AC outlets
|
230V: Schuko (CEE 7/4), IEC-320 (male plug included)120V: Nema 5-15R
|
|
Protection category
|
IP 21
|
|
Weight
|
7.4kg
|
|
Dimensions (H x W x D)
|
117 x 232 x 362mm
|
|
ACCESSORIES
|
|
|
Remote on-off
|
Yes
|
|
Automatic transfer switch
|
Filax
|
|
STANDARDS
|
|
|
Safety
|
EN-IEC 60335-1 / EN-IEC 62109-1
|
|
EMC
|
EN 55014-1 / EN 55014-2 / IEC 61000-6-1 / IEC 61000-6-2 / IEC 61000-6-3
|
|
Automotive Directive
|
ECE R10-4
|
2000W
|
Phoenix Inverter Smart
|
12/2000
|
|
Parallel and 3-phase operation
|
No
|
|
INVERTER
|
|
|
Input voltage range
|
9.3 – 17V
|
|
Output
|
Output voltage: 230VAC ±2% 50 Hz or 60Hz ± 0,1%
|
|
Cont. output power at 25ºC
|
2000VA
|
|
Cont. output power at 25ºC
|
1600W
|
|
Cont. output power at 40ºC
|
1450W
|
|
Cont. output power at 65ºC
|
1000W
|
|
Peak power
|
4000VA
|
|
Max. Efficiency 12V
|
92%
|
|
Zero load power 12V
|
8W
|
|
Zero load power in ECO mode
|
0.6W
|
|
GENERAL
|
|
|
Programmable relay
|
Yes
|
|
Stop & start power ECO-mode
|
adjustable
|
|
Protection
|
a – g
|
|
Bluetooth wireless communication
|
For remote monitoring and system integration
|
|
VE.Direct communication port
|
For remote monitoring and system integration
|
|
Remote on-off
|
Yes
|
|
Common Characteristics
|
Operating temperature range: -40 to +65ºC (fan assisted cooling) Humidity (non-condensing): max 95%
|
|
ENCLOSURE
|
|
|
Common Characteristics
|
Material & Colour: stainless steel (blue RAL 5012; and black RAL 9017) Protection category: IP 21
|
|
Battery-connection
|
M8 bolts
|
|
230 V AC-connection
|
Screw terminals
|
|
Weight
|
13kg
|
|
Dimensions (H x W x D)
|
485x219x125mm
|
|
STANDARDS
|
|
|
Safety
|
EN 60335-1
|
|
Emission Immunity
|
EN 55014-1 / EN 55014-2/ IEC 61000-6-1 / IEC 61000-6-2 / IEC 61000-6-3
|
|
Automotive Directive
|
ECE R10-5
|
3000W
|
Phoenix Inverter Smart
|
12/3000
|
|
Parallel and 3-phase operation
|
No
|
|
INVERTER
|
|
|
Input voltage range
|
9.3 – 17V
|
|
Output
|
Output voltage: 230VAC ±2% 50 Hz or 60Hz ± 0,1%
|
|
Cont. output power at 25ºC
|
3000VA
|
|
Cont. output power at 25ºC
|
2400W
|
|
Cont. output power at 40ºC
|
2200W
|
|
Cont. output power at 65ºC
|
1700W
|
|
Peak power
|
6000VA
|
|
Max. Efficiency 12V
|
93%
|
|
Zero load power 12V
|
12W
|
|
Zero load power in ECO mode
|
1.5W
|
|
GENERAL
|
|
|
Programmable relay
|
Yes
|
|
Stop & start power ECO-mode
|
adjustable
|
|
Protection
|
a – g
|
|
Bluetooth wireless communication
|
For remote monitoring and system integration
|
|
VE.Direct communication port
|
For remote monitoring and system integration
|
|
Remote on-off
|
Yes
|
|
Common Characteristics
|
Operating temperature range: -40 to +65ºC (fan assisted cooling) Humidity (non-condensing): max 95%
|
|
ENCLOSURE
|
|
|
Common Characteristics
|
Material & Colour: stainless steel (blue RAL 5012; and black RAL 9017) Protection category: IP 21
|
|
Battery-connection
|
2+2 M8 bolts
|
|
230 V AC-connection
|
Screw terminals
|
|
Weight
|
19kg
|
|
Dimensions (H x W x D)
|
533x285x150mm
|
|
STANDARDS
|
|
|
Safety
|
EN 60335-1
|
|
Emission Immunity
|
EN 55014-1 / EN 55014-2/ IEC 61000-6-1 / IEC 61000-6-2 / IEC 61000-6-3
|
|
Automotive Directive
|
ECE R10-5
|
| Weight | 3.5 kg |
|---|---|
| Size | 375W, 500W, 800W, 1200W, 2000W, 3000W |
Be the first to review “VICTRON – PHOENIX INVERTERS”
Related products
Inverters
Inverters
Inverters
Inverters
Inverters
Reviews
There are no reviews yet.