VICTRON Smart Battery Protect 12/24 65A

VICTRON Smart Battery Protect 12/24 65A

The Smart BatteryProtect disconnects the battery from non-essential loads before it is completely discharged (which would damage the battery) or before it has insufficient power left to crank the engine. The on/off input can be used as a system on/off switch. Features: 12/24V auto ranging- The Smart BatteryProtect automatically detects system voltage one time only. Bluetooth: programming made easy- When using Bluetooth to program the Smart BatteryProtect any required engage/disengage levels can be set. Alternatively, one of nine predefined engage/disengage levels can be set with the programming pin (see manual). If required, Bluetooth can be disabled. A special setting for Li-ion batteries- In this mode the BatteryProtect can be controlled by the VE.Bus BMS. Note: the BatteryProtect can also be used as a charge interrupter in between a battery charger and a Li-ion battery. See connection diagram in the manual. Ultra-low current consumption- This is important in case of Li-ion batteries, especially after low voltage shutdown. Please see our Li-ion battery datasheet and the VE.Bus BMS manual for more information. Over voltage protection- To prevent damage to sensitive loads due to over voltage, the load is disconnected whenever the DC voltage exceeds 16.3V respectively 32.6V. Ignition proof- No relays but MOSFET switches, and therefore no sparks. Delayed alarm output- The alarm output is activated if the battery voltage drops below the preset disconnect level during more than 12 seconds. Starting the engine will therefore not activate the alarm. The alarm output is a short circuit proof open collector output to the negative (minus) rail, max. current 50 mA. The alarm output is typically used to activate a buzzer, LED or relay. Delayed load disconnect and delayed reconnect- The load will be disconnected 90 seconds after the battery voltage drops below the preset level. If the battery voltage increases again to the connect threshold within this time period (after the engine has been started for example), the load will not be disconnected. The load will be reconnected 30 seconds after the battery voltage has increased to more than the preset reconnect voltage.

Domestic Shipping

We offer free shipping on all orders over $250.00. We aim to dispatch all orders within 3 business days of order, where stock is available. For custom orders or backorders we’ll communicate directly with you within 2 business days of ordering.

Most orders are shipped by Australia Post Express Parcel or Border Express Courier, which generally means:

• 1-3 Days To Major Cities
• Delivery within 2-14 days Nation Wide 

Our shipping insurance applies to approved shipping methods only, we encourage you to purchase additional shipping cover which is charged at 2.5% of the total cost of goods. This additional cover option secures a priority rebuild & express shipping of your order in the event of a shipping loss. By selecting this option, you are ensuring the goods are fully covered during transit and that Custom Lithium will fully cover the shipping and cost of repair or replacement of goods.

If this option is not selected, JT 12 Volt is not liable for the delivery and state of goods as delivery is completed by third-party providers.

If there is an issue with your delivery or you suspect damage based on the state of the packaging, please take photos and DO NOT ACCEPT OR SIGN for the delivery of the items.

International Shipping

We are able to ship your order anywhere in the world, however, we may require customers to organise their own freight for international orders. Please contact us if you wish to have your battery shipped overseas.